Revisit the calibration errors on experimental slant total electron content (TEC) determined with GPS     

Wenfeng Nie  Tianhe Xu  Adria Rovira-Garcia  José Miguel Juan Zornoza  Jaume Sanz Subirana  Guillermo González-Casado  Wu Chen  Guochang Xu 《GPS Solutions》2018,22(3):85

The calibration errors on experimental slant total electron content (TEC) determined with global positioning system (GPS) observations is revisited. Instead of the analysis of the calibration errors on the carrier phase leveled to code ionospheric observable, we focus on the accuracy analysis of the undifferenced ambiguity-fixed carrier phase ionospheric observable determined from a global distribution of permanent receivers. The results achieved are: (1) using data from an entire month within the last solar cycle maximum, the undifferenced ambiguity-fixed carrier phase ionospheric observable is found to be over one order of magnitude more accurate than the carrier phase leveled to code ionospheric observable and the raw code ionospheric observable. The observation error of the undifferenced ambiguity-fixed carrier phase ionospheric observable ranges from 0.05 to 0.11 total electron content unit (TECU) while that of the carrier phase leveled to code and the raw code ionospheric observable is from 0.65 to 1.65 and 3.14 to 7.48 TECU, respectively. (2) The time-varying receiver differential code bias (DCB), which presents clear day boundary discontinuity and intra-day variability pattern, contributes the most part of the observation error. This contribution is assessed by the short-term stability of the between-receiver DCB, which ranges from 0.06 to 0.17 TECU in a single day. (3) The remaining part of the observation errors presents a sidereal time cycle pattern, indicating the effects of the multipath. Further, the magnitude of the remaining part implies that the code multipath effects are much reduced. (4) The intra-day variation of the between-receiver DCB of the collocated stations suggests that estimating DCBs as a daily constant can have a mis-modeling error of at least several tenths of 1 TECU.  相似文献   

Image-aided platform orientation determination with a GNSS/low-cost IMU system using robust-adaptive Kalman filter     

Wenlin Yan  Luísa Bastos  José A. Gonçalves  Américo Magalhães  Tianhe Xu 《GPS Solutions》2018,22(1):12

The availability of miniaturized sensors with enhanced capabilities, new methods for image processing, and easy access to small and low-weight airborne platforms for data acquisition, including unmanned vehicles, opens new possibilities for geodetic navigation applications and developing new developments in sensor fusion. In this context, the development of efficient methods, based on low-cost sensors, to extract precise georeferenced information from digital cameras is of utmost interest. We present a method to improve the performance of the integration of GNSS/low-cost IMU by exploiting the orientation changes retrieved from digital images. In this work, a robust-adaptive Kalman filter is also introduced to further improve the performance of the method deployed. The adaptive factor and the robust factor accomplished are determined by innovation information and the threshold value of orientation changes between consecutive images. Results from airborne tests used to assess the performance of the method are presented. The results show that using a non-metric camera, the Euler angle estimation accuracy of the GNSS/low-cost IMU integration can be improved to be close to 0.5 degree and an additional improvement, which can reach 59%, can be achieved after using the robust-adaptive Kalman filter.  相似文献   

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE     

Pablo Fernández  José Pablo Suárez  Agustín Trujillo  Conrado Domínguez  José Miguel Santana 《Journal of Geographical Systems》2018,20(2):139-157

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.  相似文献   

The Effect of Key Parameters on the Strength of a Dispersive Soil Stabilized with Sustainable Binders     

Filho  Hugo Carlos Scheuermann  Martins  Carlos Guilherme  Menezes  Ricardo José Wink  Dornelles  Lucas Eduardo  Consoli  Nilo Cesar 《Geotechnical and Geological Engineering》2021,39(7):5395-5404

Geotechnical and Geological Engineering - Dispersive soils are susceptible to phenomena of internal and external erosion when in contact with relatively pure water due to its particle’s...  相似文献   

Hydrologic models coupled with 2D hydrodynamic model for high-resolution urban flood simulation     

de Arruda Gomes  Mayara Maria  de Melo Verçosa  Lívia Fragoso  Cirilo  José Almir 《Natural Hazards》2021,108(3):3121-3157

Natural Hazards - Floods are the most frequent natural disaster and pose a very challenging threat to many cities worldwide. Understanding the flood dynamic is essential for developing strategies...  相似文献   

Stormwater harvesting in ephemeral streams: how to bypass clogging and unsaturated layers     

Henao Casas  José D.  Kalwa  Fritz  Walther  Marc  Rausch  Randolf 《Hydrogeology Journal》2021,29(5):1813-1830

To cope with water scarcity in drylands, stormwater is often collected in surface basins and subsequently stored in shallow aquifers via infiltration. These stormwater harvesting systems are often accompanied by high evaporation rates and hygiene problems. This is commonly a consequence of low infiltration rates, which are caused by clogging layers that form on top of the soil profile and the presence of a thick vadose zone. The present study aims to develop a conceptual solution to increase groundwater recharge rates in stormwater harvesting systems. The efficiency of vadose-zone wells and infiltration trenches is tested using analytical equations, numerical models, and sensitivity analyses. Dams built in the channel of ephemeral streams (wadis) are selected as a study case to construct the numerical simulations. The modelling demonstrated that vadose-zone wells and infiltration trenches contribute to effective bypassing of the clogging layer. By implementing these solutions, recharge begins 2250–8100% faster than via infiltration from the bed surface of the wadi reservoir. The sensitivity analysis showed that the recharge rates are especially responsive to well length and trench depth. In terms of recharge quantity, the well had the best performance; it can infiltrate up to 1642% more water than the reservoir, and between 336 and 825% more than the trench. Moreover, the well can yield the highest cumulative recharge per dollar and high recharge rates when there are limitations to the available area. The methods investigated here significantly increased recharge rates, providing practical solutions to enhance aquifer water storage in drylands.

  相似文献   

Would different methodologies for assessing carbon leakage exposure lead to different risk levels? A case study of the Brazilian industry     

Luan Santos  André F. P. Lucena  Rafael Garaffa 《Climate Policy》2019,19(9):1102-1116

Energy-intensive industries play an important role in low-carbon development, being particularly exposed to climate policies. Concern over possible carbon leakage in this sector poses a major challenge for designing effective carbon pricing instruments (CPI). Different methodologies for assessing carbon leakage exposure are currently used by different jurisdictions, each of them based on different approaches and indicators. This paper aims to analyse the extent to which the use of different methodologies leads to different results in terms of exposure to the risk of carbon leakage, using the Brazilian industry sector as a case study. Results indicate that carbon leakage exposure is an expected outcome of eventual CPI implementation in Brazilian industry. However, results vary according to the chosen methodology, so the definition of the criteria is paramount for assessing sectoral exposure to the risk of carbon leakage.

Key policy insights

• Despite increasing discussion about the implementation of carbon pricing on the Brazilian industrial sector, the evaluation of carbon leakage risks is still neglected.

• Assessments of the risk of carbon leakage are directly related to the indicators and criteria used by each methodology. Thus, a given subsector may present different levels of exposure to carbon leakage depending on the methodological choice.

• More than a purely technical discussion, the methodological definition of carbon leakage risk is a political discussion – it can be well-conducted, leading to the success of a CPI, or even sabotaged, by implicitly subsidizing energy-intensive industries.

  相似文献   

Cavity expansion in cross‐anisotropic rock     

Dimitrios Kolymbas  Peter Wagner  Anastasia Blioumi 《国际地质力学数值与分析法杂志》2012,36(2):128-139

Schistous rock can be considered—in a first approximation—as cross‐anisotropic linear elastic material. The determination of the corresponding material constants on the basis of the laboratory investigation of rock samples often fails, as the extraction of appropriate cores proves to be unfeasible (the cores disintegrate if the schistosity is pronounced). In this paper a new method is presented to determine the material constants of a linear elastic cross‐anisotropic rock on the basis of cavity expansion field tests, e.g. with a radial jack. To this purpose, an analytic approximation for the deformation of a hydrostatically loaded cylindrical cavity in cross‐anisotropic rock is derived which serves to the inverse analysis of the material parameters. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Reconstructing tsunami run-up from the characteristics of tsunami deposits on the Thai Andaman Coast     

Chanchai Srisutam  Jean-Frank Wagner 《Coastal Engineering》2010

Tsunamis can leave deposits on the land surface they inundate. The characteristics of tsunami deposits can be used to calculate tsunami run-up height and velocity. This paper presents a reconstruction of tsunami run-up from tsunami deposit characteristics in a simple mathematical model. The model is modified and applied to reconstruct tsunami run-ups at Ao Kheuy beach and Khuk Khak beach, Phangnga province, Thailand. The input parameters are grain-size and maximum run-up distance of the sediment. The reconstructed run-up heights are 4.16–4.91 m at Ao Kheuy beach and 5.43–9.46 m at Khuk Khak beach. The estimated run-up velocities (maximum velocity) at the still water level are 12.78–19.21 m/s. In the area located 70–140 m inland to the end of run-up inundation, estimated mean run-up velocities decrease from approximately 1.93 m/s to 0 m/s. Reasonably good agreements are found between reconstructed and observed run-up heights. The tsunami run-up height and velocity can be used for risk assessment and coastal development programs in the tsunami affected area. The results show that the area from 0 to 140 m inland was flooded by high velocity run-ups and those run-up energies were dissipated mainly in this area. The area should be designated as either an area where settlement is not permitted or an area where effective protection is provided, for example with flood barriers or forest.  相似文献   

Palaeoceanographic changes in the North Atlantic during the Mid‐Pleistocene Transition (MIS 31–19) as inferred from planktonic foraminiferal and calcium carbonate records     

Iván Hernández‐Almeida  Francisco Javier Sierro  José‐Abel Flores  Isabel Cacho  Gabriel Michael Filippelli 《Boreas: An International Journal of Quaternary Research》2013,42(1):140-159

Marine sediments from the Integrated Ocean Drilling Project (IODP) Site U1314 (56.36°N, 27.88°W), in the subpolar North Atlantic, were studied for their planktonic foraminifera, calcium carbonate content, and Neogloboqudrina pachyderma sinistral (sin.) δ¹³C records in order to reconstruct surface and intermediate conditions in this region during the Mid‐Pleistocene Transition (MPT). Variations in the palaeoceanography and regional dynamics of the Arctic Front were estimated by comparing CaCO₃ content, planktonic foraminiferal species abundances, carbon isotopes and ice‐rafted debris (IRD) data from Site U1314 with published data from other North Atlantic sites. Site U1314 exhibited high abundances of the polar planktonic foraminifera N. pachyderma sin. and low CaCO₃ content until Marine Isotope Stage (MIS) 26, indicating a relatively southeastward position of the Arctic Front (AF) and penetration of colder and low‐salinity surface arctic water‐masses. Changing conditions after MIS 25, with oscillations in the position of the AF, caused an increase in the northward export of the warmer North Atlantic Current (NAC), indicated by greater abundances of non‐polar planktonic foraminifera and higher CaCO₃. The N. pachyderma sin. δ¹³C data indicate good ventilation of the upper part of the intermediate water layer in the eastern North Atlantic during both glacial and interglacial stages, except during Terminations 24/23, 22/21 and 20/1. In addition, for N. pachyderma (sin.) we distinguished two morphotypes: non‐encrusted and heavily encrusted test. Results indicate that increases in the encrusted morphotype and lower planktonic foraminiferal diversity are related to the intensification of glacial conditions (lower sea‐surface temperatures, sea‐ice formation) during MIS 22 and 20.  相似文献